Testimonials

Thank you, Thank you, Thank you! I really appreciate such fast service. It works great and tastes wonderful.
Jerry H

Thank you that we got our Berkey in time. We don't know if you have heard what is going on here in Australia, but we don't have to worry about our drinking water. We are so safe.
Kind regards, Ralph S


  Home > Water Filter Brands > Other Water Filters >

  C100 Aquagate Water Controller
C100 Aquagate Water Controller


 
Sale Price $318.05



Availability:: Usually Ships in 2 to 3 Business Days
Product Code: C100

Description
 
  • AquaGate C100 Leak Controller Specs:

  • Size:  6.75” (h) x 3.25” (w) x .5” (d)

  • System operating range:  40º F to 100º F

  • Water operating range:  36º F to 180º F

  • Power:  4 x “AA” Alkaline Batteries or optional 220/110 AC to 9V DC converter

  • Valve:  1” - 1.5” Full Port Brass Ball Valve, 5V DC

  • Alarm:  85+dB at 5’ @ 3.4± 0.5 kHz pulsing alarm

  • LED:  Blue, Green, Red

  • Mounting:  Accessories supplied for wall mounting

  • Sensor:  Electromechanical dual probe with series connectors

  • Water Detection Sensitivity:  Down to 2 ppm TDS(total dissolved solids)

  • Pressure Rating:  0-180 p.s.i.
Features
    • AquaGate C100 Leak Controller Instructions:


    • AquaGate Informational Video


    • Keep chemicals, acids, and organic solvents away from the controller and sensor.


    • The sensors cannot have anything placed on top of them.


    • Since the controller is in constant contact with your water supply, the maximum life expectancy of the controller is ten years. Although you may achieve longer use of the controller depending on the quality of your water source, we recommend that you do not exceed this time period.


    • Do not install the AquaGate valve ahead or upstream (in front of) a fire sprinkler system. This violates municipal code.


    • To attach the valve to the plumbing supply line have a professional licensed plumber install the threaded ball valve to the copper piping.


    • We recommend that you have a shut off valve upstream of the AquaGate. Close this valve prior to installation.


    • The preferred installation of the AquaGate C100 would include the use of unions before and after the valve. All soldering of connectors should be done prior to the valve being connected, as heat from soldering can damage the seals of the valve and invalidate the warranty.


    • Mount the controller box on a clean, flat wall surface that is within 10’ of the valve.


    • Attach with the #8 mounting screws (included). Confirm that the box is secure and all wiring to the valve, sensors, power and external interface is secure.


    • Placing the sensor is a very important part of the installation. The sensor is the heart of the controller, and if water doesn’t touch the sensor it will not activate. Also, it is extremely important that the metal side of the sensor always remains facing down after the installation.


    • To connect the sensor to the circuit board, gently push the female connector at the end of the sensor cable onto any one of the 2 pin gold male connectors marked “sensor” on the circuit board.


    • You can place the sensor on an absorbent material
    • such as an ordinary paper towel to increase the detection of small leaks.


    • Additional sensors may be added to your system.


    • Please note that for the sensors to work, the leak does not have to enter the slots on top of the sensors. This may happen, but the sensors also detect surface moisture via the sensor probes on the bottom of the sensor.


    • In the event that the sensors detect a leak, the controller will close the valve to the red position, and sound an alarm.


    • DO NOT INSERT ANYTHING INSIDE THE VALVE WHILE IT IS NOT
    • CONNECTED AND INSTALLED IN A WATER SUPPLY. SERIOUS INJURY OR VALVE DAMAGE WILL OCCUR!

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Water Filter Brands > Other Water Filters


Bung Wrench 2H for 55 gal Water Storage Barrel $7.95
Bucket Style Toilet 4A $17.95
Bucket Berkey $97.00
Brita OB35 Riviera Water Filter Pitcher 42557 $37.99
Brita OB11 Slim Water Filter Pitcher 42629 $19.37
Brita OB03 Replacement Pitcher Filters (3-Pack) $22.79
Brita MYRF-100 Refrigerator Water Filter $38.75
Brita FR-200 White Faucet Filters 42402 (2-Pack) $45.58
Brita AVFR-200 Replacement Faucet Filters $22.79